On average, every German with a desk workplace spends around 80% of the day sitting on a desk chair, in the car or on the sofa. With around 40 years of work that is around 100,000 hours per life.
This is in contrast to the fact that the human body is made for movement and not for long static positions in an upright position!
Information:
Employers are obliged by an EU directive to inform employees about all health-related issues in connection with their workplace. This requirement alone is not enough. The need independent Fighting for a healthy workplace will remain, even if it has been shown to lower sick leave due to back pain. Larger companies have in-house health advice from a company doctor and a physiotherapist.
$config[ads_text1] not found
Many people feel sick despite having good seating. The causes are a lack of knowledge about the movement and adjustment options of the chair and table, a lack of motivation to consciously pay attention to your sitting postures and movement options and to train incorrect sitting habits.
This problem can in many cases:
Seating furniture, office chair:
$config[ads_text2] not foundSince long static sitting postures can make you sick in the long run, some form of Dynamic sitting to get voted. A suitable work chair that can be adjusted in many directions supports the moving form of sitting and facilitates the natural change between the different sitting postures.
recommendations:
Even the best chair cannot replace a lack of exercise!
$config[ads_text2] not found
$config[ads_text3] not foundThe following article may also be of interest to you: Ergonomic office chair
Flat screen:
Keyboard:
writing desk:
A real mouse, together with the ergonomically adjusted desk height, offers the best conditions to avoid complaints due to poor posture or overloading of the hand and arm muscles.
The mouse arm should form a right angle with the edge of the table. The mouse should be adapted to the size of the hand and its anatomy. The arched hand is used to determine the size. An ergonomic mouse that is tailored to the anatomy of the hand is shaped to taper towards the fingers and round on the ball of the hand. With an ergonomic mouse, the hand does not lie horizontally as with normal mice, but vertically, as if you were holding a glass. This ensures that the muscles and vision of the forearm are not twisted when using the mouse, thus preventing excessive strain caused by poor posture.
$config[ads_text4] not found
The mouse should be positioned as close as possible to the keyboard and a straight-edged mouse pad should be used. There are also mouse pads with a support for the wrist or special wrist supports that ensure that the wrist does not bend up or down.
The speed of the mouse on the computer monitor should be adjusted to avoid unnecessary hand and forearm movements.
Temperatures rise and performance decreases? Many workers wonder what rights they have in this situation. Read more about this under: Heat-free in the office
The ergonomic workplace is made possible by the ergonomic keyboard added, which should be separable from the screen, by a optimal distance to be kept between eyes and screen and to avoid straining the hands and forearms.
A Laptop would for example Not suitable for an ergonomic workplace, as the keyboard cannot be individually adjusted here.
The Storage space for the hands in front of the keyboard should 5-10 cm be. Further requirements for an ergonomic keyboard are the possibility of a Incline up to 15 degrees and a Construction height of 3 cm.
Ergonomic keyboards can be in two parts, where there is a kink in the middle of the keyboard and the two sides come to a point, as the position of the arms and wrists naturally corresponds to. This prevents the wrists from kinking.
The keyboard should work in low light illuminated be and the keys should be concave, so with a small depression towards the middle the key to improve the grip of the keys on the ergonomic keyboard.
Also for the key travel, so the Depressibility of the buttons, there are guidelines that he should 2 to 4 mm and not be too stiff. There are also shelves for the wrists for ergonomic keyboards to prevent them from kinking up or down. The keyboard should be positioned close to the body to avoid bending over and hunching over.
One of the most important items in the ergonomic workplace is the Office swivel chair. This of course should stable and stable and with at least five roles be equipped. He should safe to roll away be.
An important element of the ergonomic office chair is that Suspension when sitting downto relieve the spine from shocks. The Seat height should be adjustable between 42 and 50 cm - the seat is optimally adjusted when a right angle is formed between the thighs and lower legs and heels are at the level of the hollow of the knee.
Between Upper body and thighs the angle should be a little more obtuse and 110-120 degrees be.
The backrest of the ergonomic office chair should be at lower back Most bulging to relieve the lumbar spine. A separately adjustable Neck support can support the natural curvature of the spine and relieve the neck.
Likewise can Armrests Relieve the shoulder and neck area, but these should be adjustable and end approximately at the height of the table in order to extend the support of the arms.
Alternative office furniture as a Sitting ball or the like must also meet the requirements for ergonomic seating furniture.
Read more about the topic here: Ergonomic office chair
The demands on you height-adjustable desk are diverse, but they are indispensable in an ergonomic workplace.
If the desk is mainly used by one person, it can be adjusted specifically for that person. If the desk is used by several people, it should be height-adjustable quickly and easily in order to avoid tension and back pain.
Especially table with one Stand-sit function offer variety for monotonous work at the desk: Here you can decide individually whether the worker wants to work standing or sitting. In recent years, various studies have indicated that so the back is relieved and a shortening of the muscles due to prolonged sitting prevented can be.
The height adjustability should be between 68 and 118 cm be. Since these tables, however very expensive are in the process of purchasing, if need be, alternatives such as additional standing desks dodge.
A sufficient one Legroom and rounded edges and corners should also be features of the height-adjustable desk. Furthermore, there are recommended minimum dimensions for a height-adjustable desk, provided that the activity involves mixed work, i.e. work is carried out on the desk and also on the PC. The dimensions should be at least 160x80cm be.
Depending on the type of monitor, the desk should have a certain depth have to the Minimum distance to the monitor and thus to ensure an ergonomic workplace.
Even with a desk workstation, consequential damage caused by years of sitting can be prevented or minimized by setting up an ergonomic workstation and active countermeasures.
Even in vocational training, more emphasis should be placed on teaching back-friendly working behavior, recreational sports and the establishment of ergonomic workplaces in the interests of prevention. Specialists in the field of occupational medicine are already working in larger companies and appropriate courses are being offered. These measures could certainly save many “desk criminals” from pain and save a lot of money in the healthcare system by avoiding back-related sickness absences.