This topic is a continuation of our page: Radiation Therapy
Radiation planning, planning of radiation therapy, preparation of radiation therapy
Radiation therapy planning includes all preparatory measures that are necessary in order to be able to carry out radiation therapy according to the required quality criteria.
The following steps are usually carried out when planning treatment:
The positioning of the patient must be selected so that the patient can be reproduced comfortably and safely and that the treatment region can be reached as directly as possible by the therapy beam. The following are common examples:
$config[ads_text1] not found
Once the positioning is complete, a computed tomography (slice x-ray) of the therapy region is made in this position. A three-dimensional model of the patient is calculated with this image data. Furthermore, with the computer tomography, the first target markings are drawn on the skin, which are required for the same positioning during the irradiation. There are three room lasers each in the room of the computer tomograph and in the treatment room of the linear accelerator. One is attached to the left, one to the right and the third above the treatment table. All three lasers meet at one point. In the accelerator room, this is the point that is exactly one meter away from the point in the accelerator head where the X-ray beam is generated. At the same time, the axis of rotation of the linear accelerator runs through this point, which it can bypass 360 °.
Most often this point is localized in the tumor after treatment planning has been completed.
If all three laser points coincide with the skin markings, the patient is in the same position during each irradiation as he was when planning.
Four slice x-rays at the height of the upper body
In the image data set obtained, the attending physician now marks which area should receive the therapeutic radiation dose and which areas and organs must be spared. Many aspects of the tumor disease must be taken into account. For some, it is sufficient to treat the tumor region yourself; for others, the lymphatic drainage must also be included, as metastases (settlements) in this region are more common in them. In addition, the radiation exposure of the healthy neighboring organs must be taken into account so that there is no permanent damage caused by radiation therapy.
$config[ads_text2] not found$config[ads_text3] not found
Reconstruction of the pelvic organs in men:
Blue = rectum
Pink = prostate
Orange = seminal vesicles
Dark red = urinary bladder
Marked therapy region for prostate cancer (red circles)
According to the doctor's specifications, the irradiation plan is now processed by the Medical physicist created. This includes from which and from how many angles the liner accelerator should shine on the therapy region, what energy and intensity the X-ray must have, etc. So the technical aspects are determined.
Exemplary projection of an irradiation field during irradiation in the ear, nose and throat area
Simulation image of the left shoulder
If the plan has been calculated and accepted after checking the quality requirements, an irradiation is now run through, i.e. simulated.
To do this, the patient is laid down in the same way as he was during the computer tomography. The alignment is done with the help of the skin markings.
When calculating the radiation plan, images were reconstructed that show what X-ray images would have to look like if they were made from the angles from which the linear accelerator shines. With the help of a special X-ray device, the X-ray simulator, X-ray images are now made from these angles and these are compared with the calculated ones. If these match from all angles, the radiation therapy can be carried out in this way.
$config[ads_text4] not found